| |
|
|
| |
 |
 |
 |
| PSA-1 |
GT2 |
Classic |
The
SansAmp PSA-1 incorporates the advantages of digital
programmability while preserving a 100% analog signal
path.
Not
just another pre-amp, the controls are designed
to provide you with the flexibility to achieve
virtually any professionally miked tube amp/speaker
cabinet system sound. |
|
SansAmp
GT2's streamlined design allows you to "architecturally"
create your own rig in seconds by choosing amplifier
type, modification, and speaker cabinet/mic placement
configurations.
You
can easily mix and match specific sound characteristics
in ways that would otherwise be physically improbable,
probably impractical, and definitely not cost effective. |
|
| Still
made almost entirely by hand,the Classic's main module
contains a bank of eight Character switches, which
adjust the fine and subtle nuances of tonality, harmonics
and dynamics. Its unconventional design not only keeps
the unit compact, it is the key to the wide range of
sounds you can achieve. |
|
| |
|
|
 |
 |
 |
| TRI-AC |
TRI-OD |
Acoustic
DI |
SansAmp
TRI-A.C. is a 3-channel programmable stomp box with
three independent footswitches. It combines the warmth
of a 100% analog signal
path with the convenience of digital programmability.
It just doesn't get more fun than this.
You can dance the night away--to the music, not the gear.
Whether you sway, twirl, rock, groove or mosh,
SansAmp TRI-A.C. won't get in the way of your creative
flow. Put your three favorite tones, from sparkling clean
to full metal mayhem, right at your feet. |
|
The
TRI-O.D. can be used with any amp/combo, or to drive
a power amp and guitar speaker cabinets. While designed
primarily for live performances, you can also record
direct with each of the prevoiced tube amp sounds.
One
footswitch takes you through three completely different
tube amp characters. When you change channels,
there is a distinct difference in the entire sound,
not just the gain structure and EQ. The Master
Output Section's Volume control can then be set
for the particular occasion. |
|
Our
exclusive SansAmp technology has been adapted to
incorporate tube/microphone emulation specifically
for the acoustic guitar player. SansAmp Acoustic
DI removes unwanted feedback and provides the natural
warmth and presence of a properly miked acoustic
guitar.
Engineered
for both studio and live applications, SansAmp
Acoustic DI is designed to go direct into the mixing
console of a recorder or PA system. It can also
be used with conventional acoustic or electric
guitar amps to enhance and expand their capabilities. |
|
| |
|
|
 |
 |
 |
| Bass
Driver DI |
RBI |
XDI |
| SansAmp
Bass Driver DI gives you the warmth, presence and punch
of a miked-up bass tube amp system in a conveniently
portable direct box/pedal format. SansAmp Bass Driver
DI can be used as a pre-amp or stomp box with your
existing stage rig. You can drive a power amp and speaker
cabinets. Or go direct into the mixer of a recorder
or P.A. |
|
| SansAmp
RBI features a dedicated Mid control; individual Level
control for the XLR out to optimize your amp's output
relative to the P.A. system; Effects Loop; Mix 50/50
switch to configure the Effects Loop in series or parallel;
1/4"
rear input and XLR output with select- able levels; buffered
uneffected XLR output to run a dry signal to a separate
channel; |
|
SansAmp
XDI’s unique design features advanced, low
noise F.E.T. technology to provide a natural, transparent
guitar signal to your computer. There are two outputs:
a balanced XLR and a Lo Z 1/4”, which eliminates
the need for an XLR converter for sound cards that
accept an unbalanced input; and there are two 1/4” inputs:
Normal and Bright.
For
general purposes, it can also function as a standard
transparent active direct box to preserve signal
integrity when transmitting a signal over long
cable lengths. |
|
|
|
|
