The RODE NTK Mic is a tube microphone designed exclusively
for recording professionals who want only the best. Large
capsule gold-plate membrane with hand-selected and graded
twin triode tubes for wide dynamic range, ultralow noise,
and fantastic presence and warmth.
R0DE
NT2-A Large-Capsule Studio Condenser Microphone
R0DE NT2-A Large-Capsule Studio Condenser Microphone
Features:
• Australian designed and manufactured
HF1 1" edge
terminated, gold sputtered, dual 5 um diaphragm capsule
• 3-position variable polar pattern: Omni, Cardioid & Figure
8; all controlled on the mic
• 3-position variable high-pass filter: Flat, 80Hz or
40Hz
• 3-position variable pad: 0dB, -5dB, or -10dB
• Ultra low noise, transformerless SMT circuitry
• Wide dynamic range
• High-strength heat-treated steel mesh head
• Durable satin nickel finish
• Internal capsule shockmounting
• Supplied complete with soft pouch and clip
• Designed and manufactured in Sydney, Australia
• Studio recording quality condenser microphone
• Rugged fiber-reinforced ABS construction
• 9V battery operation
• Custom designed integral wind screen
• Low-noise circuitry
• Low handling noise
• Integral hot-shoe mount and zip pouch
• Designed and manufactured in Australia
• Full 2-year guarantee
Superior sound quality, super low noise -- built for
studio, stage, or location work.
Stylish and modern, the NT3 is an externally biased,
true condenser mic with hypercardioid polar response.
It features transformerless output; heavy-duty cast-satin
nickel body; high immunity to RF interference; a high-strength,
welded and heat-treated mesh head; internal capsule shock
mounting; battery or phantom power; and a battery status
LED.
If you're in an active studio using nice mics you need
a good shockmount system. R¿de makes one of the
best and least expensive. Total elastic suspension prevents
sonic explosions from clumsy musicians and protects all
your equipment. Rugged, durable construction will last
through years of hard use.
Studio recording quality
• Rugged all-metal construction
• Attractive satin-nickel finish
• Heat-treated, high-strength mesh head
• Custom designed integral 'plosive' screen
• Ergonomically weighted & balanced
• Low noise circuitry
• Low handling noise
• Complete with stand mount & zip pouch
• Designed & manufactured in Australia
• Full 5 year guarantee
Total control and superlative audio characteristics
make this one of the most versatile condenser mics you'll
ever encounter. Continuously variable controls on the
mic body let you dial in virtually any polar pattern,
totally variable high-pass filtering, and pad values.
20Hz-20kHz frequency response. Includes plastic molded
travel case and SM2 shockmount.
• Continuously variable controls on the mic body Dial
in virtually any polar pattern
• Totally variable high-pass filtering
• Variable pad values
• Includes plastic molded travel case and SM2 shockmount
• 20Hz-20kHz frequency response
• Includes plastic molded travel case and SM2 shockmount
The Classic II when classic
performance is needed.
From its custom-designed Jensen transformer to the dual
pressure-gradient transducer, this valve microphone is
a classic. Machined from solid brass, hand polished,
glass bead-blasted, and coated in satin nickel, it has
Class A valve circuitry that gives unmatched warmth,
clarity, and sensitivity when critical vocal and instrument
recording is required.
R0DE Classic II Microphone with Flight Case Features:
• Class A valve circuitry
• Dedicated power supply
• 6072 twin triode
• New "edge-terminated" gold-sputtered diaphragm
• Custom-designed Jensen transformer
• -10dB and -20dB pads (switched from power supply)
• 2-position high-pass filter (switched from power supply)
• 9 polar patterns (switched from power supply)
• Double-shielded, oxygen-free copper multicore cable
with custom-designed heavy-duty plugs and sockets
R0DE Classic II Microphone with Flight Case Specifications:
• Capsule: externally polarized 18" dual-diaphragm
condenser
• Active electronics: thermionic impedance converter
• Pickup pattern: switchable omnidirectional/cardioid/figure-8
in 9 steps
• Frequency response: 20Hz-20kHz
• High-pass filter: switchable: flat, -15dB @ 20Hz, -21dB
@ 20Hz. Cascaded first-order filters
• Output impedance: 200 ohms
• Sensitivity: -37dB re 1 volt/Pa (14mV @ 94dB SPL) ±2dB
•Equivalent noise: <18 dBA ("A"-weighted
per 'IEC268-15)
• Maximum output: +2dBu (@ 1% THD into 1K)
• Dynamic range: >113dB (per IEC268-15)
• Maximum SPL: 131dB SPL (@ 1% THD into 1K)
• Signal/noise ratio: >76dB (per IEC268-15)
• Power requirements: dedicated power supply (110
~ 120V/220 ~ 240V, 50/60 Hz) Weight: 1.3 lbs
Like its name suggests
this RØDE microphone was specifically designed ‘ON-AIR’ applications
where wide frequency response and low distortion are
demanded.
Winner of the Radio World/US National Association of
Broadcasters (NAB) ‘What’s Cool’ award
in 1998, the Broadcaster has become an industry standard
when studio sound quality is required for on air applications.
Utilizing an Australian designed and manufactured RØDE
1” externally biased condenser transducers, the
Broadcaster features a switch-able high pass filter to
remove low frequency rumble. A unique ‘ON-AIR’ LED
indicator can be switched “on” or “off” by
shorting contacts on the 5 pin audio connector. This
feature allows console operators to warn the ‘Talent’ that
the mic is live.
The RODE NT1-A Anniversary Model Microphone is a complete
redesign of the now legendary classic NT1 studio microphone.
From the new nickel-plated body to the state-of-the-art
surface-mount electronic circuitry, you'll love using
it. With a self-noise figure of 5dB, the NT1A is one
of the lowest noise studio microphones in the world,
regardless of cost. Unrivaled low distortion, higher
SPL capability, and extended dynamic range make it well-suited
for even the most demanding digital recording applications.
Includes shockmount.
R0DE NT1-A Anniversary Model Microphone Features:
• Nickel plated body
• Unrivaled low distortion
• Ultralow self-noise (5dB)
• High SPL capability range
The RODE NT4 Dual-Element Stereo Microphone is a small-diaphragm
condenser microphone specifically designed for stereo
recording. It features dual heads in a 90° XY configuration
-- great for acoustic guitar, live concerts, and when
mono-compatibility is an issue. Its compact size and
design allows for effective and subtle positioning which
is crucial when close miking. The NT4 is supplied with
a custom case, stereo breakout cable, stand mount, and
windscreen.
R0DE NT4 Dual-Element Stereo Microphone Features:
• XY-stereo coincident-pair elements
• Compact size
• High SPL/low noise
• Great sound
