Accessories
  Monster Cable
   
  Alesis
  Art
  Behringer
  Crown
  DBX
  Fender
  Fishman
  M-Audio
  Mackie
  Marshall
  Presonus
  Roland
  SWR
  VOX
 
  Deering
  Gold Tone
 
  Cort
  Ibanez
 
  • Motu
  Digidesign
  • M-Audio
  • Glyph
 
  Alesis
  Edirol
  Korg
  Kurzweil
  Midiman
  Roland
 
SRM 450
SRM450 Features:
*2-way bi-amplified, optimized active system - no external power amplifier needed!
*Built-in monolithic FR Series™ 300 watt RMS bass & 100 watt RMS mid/high amplifiers
*Built-in precision 24dB/oct. Linkwitz-Riley electronic crossover
*300mm long-throw frequency transducer
*High-output precision titanium compression driver
*Studio-quality maximum dispersion horn design
*High SPL Output/Low Distortion
*Electronic Time Correction, Phase Alignment, & Equalization
*Servo Feedback controlled woofer
*Tough, impact-resistant, lightweight polypropylene enclosure
*Gig-bag available
SR1530
• Linear response from 40Hz to 20kHz at high SPLs
• High definition, high output, and wide dispersion
• FR Series tri-amplification: 500 total watts RMS delivered to internal transducers (300W RMS LF, 100W RMS Mids, 100W RMS HF)
• Electronic equalization, time correction, and phase alignment
• Optimized Wavefront high/mid horn system
• RCF Precision Transducers
• 15-inch LF transducer with Inside/Out- side heat-resistant voice coil and high-flux magnetic circuit
• 6-inch horn-loaded midrange
• 1-inch-exit compression driver
• Trapezoidal Baltic Birch plywood enclosure with rugged molded resin end caps
• Weight-balanced with side handles for easy carry and set up
• Top and bottom handle for easy repositioning
• Full electronic and component protection circuitry
SA1521 Active Loudspeaker

The SA1521 is a truly collaborative effort between Mackie, EAW Engineering and RCF Precision. It's an honest-to-gosh technology breakthrough - an active, full-bandwidth solution with seamlessly integrated power and control, premium transducers and that wonderfully wide dispersion that lets everyone in the audience hear the same thing.

Put the SA1521 up against the most popular 15" two-way systems in the world and what happens? You suddenly discover that the competition is obsolete - problematic in design, poor in definition and basically nothing more than a 15" and a 1" playing separate tunes.

It doesn't take long to realize that the new SA1521 truly RE-DEFINES 2-way 15-inch speaker systems.The SA1521 is an Active speaker system that expands the performance envelope of previous Mackie Active products. It has better resolution, output and linearity than the SRM450 and higher output than the SR1530 product. It also sets a new standard for 15-inch woofer/ 1-inch compression driver based systems through it's smoothness, power and mid-band performance. This leads to a compact product with a broad range of applications that is powerful and very easy to use.

SR1232 Active Loudspeaker
The SA1232 features the same horn assembly as introduced in the Mackie Designs SR1530 active 3-way speaker. The horn is a one piece design with 90º x 40º dispersion that integrates both the mid range and high frequency sections. This allows for the horn loading of the mid-range transducer and seamless coupling between the MF and HF sections. The 6-inch mid-range's basket assembly is designed as part of the horn assembly and is also designed to function asan optimized compression chamber, dramatically simplifying the mid-range assembly. Also, in three-way designs the mid frequency horn and the high frequency horn are physically pointing to a different location in front of the box. The SA1232 features an "Optimized Wavefront" horn design. Unlike typical mid / high horns, the high frequency section is positioned to fire down into the six-inch mid-range's dispersion pattern. This creates a focused, single wave front with excellent phase and power response characteristics.
SWA 1501 Active Subwoofer

The SWA1501 features a sophisticated on board control system allowing for flexible integration with active or passive full range or mid/high speaker systems. The input panel accepts line level input signal and has LOOP OUT connectors for signal routing to other devices. It also has HIGH PASS out connectors for connection to active full range speakers or amplifiers powering passive full range speakers. All signal routing is through XLR connectors in L+R stereo or mono. There is a phase selection switch and a recessed level control. The system features thermal protection for the power supply and amplifier module and also incorporates RMS limiting protection for the amplifier stage that limits the amount of long term power deliver to the transducer.The cabinet is constructed using 15mm thick multi-layered birch plywood and finished in black splatter paint. There are one handle on each side for efficient loading and transport as well as a top, female pole mount fixture.

swa1801 Active Subwoofer

The SWA1801 features a sophisticated on-board control system allowing for flexible integration with active or passive full range or mid/high speaker systems. The input panel accepts line level input signal and has LOOP OUT connectors for signal routing to other devices. It also has HIGH PASS out connectors for connection to active full range speakers or amplifiers powering passive full range speakers. All signal routing is through XLR connectors in L+R stereo or mono. There is a phase selection switch and a recessed level control. The system features thermal protection for the power supply and amplifier module and also incorporates RMS limiting protection for the amplifier stage that limits the amount of long term power deliver to the transducer.

Fussion 3000 3-way Active System

Mackie's FUSSION 3000 is a high-output, 3-way, medium-throw, active speaker system. It features high-precision transducers combined with application-specific amplifier technology that allows this integrated system to generate high output levels with very low distortion characteristics.

FUSSION 3000 transducers include a special, low inductance, double voice-coil 8-inch, horn-loaded (80° x 70° ) midrange transducer designed to deliver the lowest possible distortion even at full power. It operates between 500Hz and 2,500Hz, eliminating the placement of a crossover point in the middle of critical voice frequencies. The result is super-smooth phase and power response that delivers extraordinary intelligibility at high output levels.

A 3-inch titanium diaphragm compression driver, mounted to an 80° x 70° horn with a 1.4-inch exit throat, reproduces frequencies above 2,500Hz.

Fussion 1800

The SWA1801 features a sophisticated on-board control system allowing for flexible integration with active or passive full range or mid/high speaker systems. The input panel accepts line level input signal and has LOOP OUT connectors for signal routing to other devices. It also has HIGH PASS out connectors for connection to active full range speakers or amplifiers powering passive full range speakers. All signal routing is through XLR connectors in L+R stereo or mono. There is a phase selection switch and a recessed level control. The system features thermal protection for the power supply and amplifier module and also incorporates RMS limiting protection for the amplifier stage that limits the amount of long term power deliver to the transducer.

C300 SR Loudspeaker

The C300 (Speakon®) and the C300i (1/4 inch) uses the same basic transducers as the active SRM450 – with two differences. TheC300/C300i's 1.75-inch high frequency compression driver uses a composite mylar diaphragm; the12-inch low frequency transducer incorporates a 3-inch Inside/Outside temperature- resistant voice coil. Both of these compensate for the fact that the speaker system must be able to handle a wide range of external power inputs (including our mega-powered PPM808S or PPM808M).

The C300/C300i uses the same studio-quality horn assembly with multi-cell aperture horn throat and large format exponential/conical high-frequency horn mouth for superb dispersion. This means everyone in your audience hears clearly... not just the people in the middle between the speakers.

S500 SR Loudspeaker

The S500 is so efficient that it makes beautiful music with any of our PPM powered mixers. But when you team it with the high-wattage models, it really starts shaking your audience up. Tight bass, smooth midrange, spine-tingling treble... at shock volumes up to 127dBA. We're talking loud and accurate.

Like the C300 and SRM450, the S500 employs a trapezoidal enclosure that's both strong and resonance damping. Unlike them, it's built of rugged 16-ply Baltic Birch with tough end caps made of pressure-injected structural resin. The perforated steel grille is coated with a special scuff and weather-resistant polymer coating. Cast aluminum side handles are placed at the speaker's center of gravity for easy carrying and set-up.

Rear panel inputs include both 1/4" and Neutrik® Speakon® connectors wired in parallel. Frankly, the S500 wasn't designed to be the cheapest 15-inch 2-way system on the market. It was designed to be one of the most accurate and easy on the ears at high output levels (which costs a bit more).

[ top ]

Brian Moore
Carter
Cort
Daisy Rock
Danelelectro
ESP
Gretsch
  Guild
Ibanez
  Jackson
Jay Turser
  Olympia
Parker Guitars
  PRS
  PRS SE
Samick
Sierra Steel
Traveler
 
Alesis
Edirol
Korg
Kurzweil
Midiman
Roland
 
  AKG
Audio Technica
Behringer
CAD
M-Audio
MXL
Rode
Roland
Sennheiser
Shure
 
Behringer
Korg
M-Audio
Mackie
   
  Korg
Roland
 
ShreveSystems.com
CoolAssGuitars.com
All prices represent a 3% cash discount & are subject to change without notice. All sales are FINAL
View Terms