| |
|
|
| |
| 828
FireWire System |
 |
The
828 is an affordable, FireWire based digital audio
hard disk recording system for Mac OS and Windows.
If you have a G4 Cube, or FireWire iMac, add an
828 for a virtually silent (fanless) recording
system. The 828 is also the perfect companion for
your laptop computer. With built-in phantom powered
mic pre-amps and no-latency monitoring, you don't
need a mixer for portable recording. Included with
the 828 is the acclaimed AudioDesk workstation
software for Mac. Of course, the 828 ships with
ASIO, GSIF, Sound Manager, and WDM drivers for
compatibility with your favorite software.
The
828 provides 8 channels of bal/unbal analog input
and output using 24-bit converters with 105dB
dynamic range. 8 channels of 24-bit ADAT lightpipe
and stereo S/PDIF I/O provide a grand total of
18 simultaneous inputs and outputs. Analog inputs
one and two are designed for maximum flexibility.
They use Neutrik XLR/TRS combo connectors so
you can plug anything from a microphone to a
guitar into the same jack. If you prefer to use
condenser microphones, you can apply 48-volt
phantom power. Each input provides 40dB of gain
with convenient front panel trim knobs. |
|
|
|
| 896 |
 |
The
896 is a 96kHz Firewire audio interface for Mac and
Windows. it provides everything you need to make
great recordings, all in a durable 2U rack mountable
package. The 896 is the perfect companion for your
laptop computer. With eight built-in mic pre-amps
with individually switchable phantom power and no-latency
CueMix Plus monitoring, you don't need a mixer for
portable recording. Included with the 896 is the
acclaimed AudioDesk workstation software for Mac.
Of course, the 896 ships with Sound Manager, ASIO,
GSIF, and WDM drivers for compatibility with your
favorite software.
- 44.1,
48, 88.2, and 96kHz sample rates supported
- 8
channels of 24-bit ADAT optical input/output
- Stereo
AES/EBU input and output with built-in sample
rate conversion
- Word
clock I/O. Can slave to word clock at half or
double speed. Can send word clock at half speed
- Eight
24-bit analog inputs using bal/unbal 1/4"/XLR/Neutrik
combo connectors
- Eight
mic preamps with switchable 48-volt phantom power
on the front panel
- Eight
24-bit analog outputs using balanced XLR connectors.
Each output is indiv. switchable to +4 or -10
- 109dB
dynamic range
|
|
|
|
| 1296 |
 |
The
MOTU 1296 is the professional 96kHz audio interface
you have been waiting for. Equipped with the latest
generation 24-bit, enhanced multi-bit 128x oversampling
96kHz converters, the 1296 achieves a remarkable
A-weighted signal-to-noise ratio of 117dB with balanced
XLR connectors throughout. Ideal for surround applications,
the 1296's 12 inputs and 12 outputs can support two
simultaneous 5.1 mixes. And the 1296 is ful of advanced
features, like AES/EBU I/O with sample rate conversion
both in and out.
- Twelve
channels of +4, balanced, 96kHz 24-bit analog
inputs and outputs using XLR jacks
- 19-segment
LED meters on every input and output
- 16,
20, and 24-bit recording at 44.1, 48, 88.2, or
96kHz
- Word
clock in and out
- Dedicated
word clock input for AES/EBU I/O
- Audiowire
connector for PCI-324 audio card
- A-weighted
dynamic range 117dB
- R/CORE
transformers for efficient, low-heat operation
with virtually no magnetic interference or acoustic
hum
|
|
|
|
| 2408mkII |
 |
The
2408mkII is a computer-based, digital audio hard
disk recording system for Mac OS and Windows. At
this price, no other system even comes close to
giving you the 2408mkIIs remarkable combination
of high-end features and raw number of simultaneous
inputs and outputs. You no longer need to dream
about systems that cost thousands of dollars -
or agonize over systems that don't really give
you what you want. The 2408mkII gives you everything
you need to make professional 24-bit, multitrack
audio recordings with no compromises or
"gotchas."
- 8
analog inputs/outputs with 24-bit converters
on balanced/unbalanced 1/4" TRS connectors
- 105dB
S/N ratio (A-weighted)
- 24
channels of ADAT optical input/output
- 24
channels of TDIF (Tascam digital) input/output
- 2
channels of S/PDIF in and 4 channels out
- 16,
20, and 24-bit recording at 44.1 or 48 kHz
- ADAT
sync input
- Wordclock
in and out
- Digital
Timepiece Control track input
- Includes
cross-platform PCI-324 card
|
|
|
|
| 1224 |
 |
The
1224 is a computer-based digital audio hard disk
recording system for MacOS and Windows. The 1224
combines the latest 24-bit converter technology
with precision engineering. The results are exceptional
dynamic range and sound quality that rivals today's
most expensive systems. If nothing but the finest
audio quality will do, look no further than the
MOTU Audio 1224.
- 8
24-bit balanced TRS analog outs
- 2
24-bit balanced XLR analog outs
- 8
24-bit balanced TRS analog ins
- AES/EBU
digital I/O
- 16,
20, and 24-bit recording at 44.1 or 48kHz
- Word
clock in and out
- Core
system includes cross-platform PCI-324 card
|
|
|
|
| 308 |
 |
The
308 is a multi-format digital audio interface designed
for use as an expander for an existing MOTU Audio
core system, such as the 1224 or 2408. The 308
provides 24 simultaneous channels of input and
output via three popular digital audio formats
(optical S/PDIF, RCA S/PDIF, and AES/EBU). The
308 is the perfect interface for anyone who requires
compatibility and instant access to an assortment
of professional and semiprofessional digital formats.
- 8
channels of optical S/PDIF input and output
- 8
channels of RCA S/PDIF input and output
- 8
channels of AES/EBU input and output
- 16,
20, and 24-bit recording at 44.1 or 48kHz
- Word
clock in and out
- Audiowire
connector for PCI-324 audio card
|
|
|
|
| 24i |
 |
The
MOTU Audio 24i interface fulfills the promise of
host-based hard disk recording: to record, edit,
mix, process, and master your multitrack recording
projects entirely inside the computer. The 24i
provides 24 high-quality, 24-bit analog inputs
in a cost effective, 1U rack package, allowing
you to connect and record from 24 simultaneous
analog sources.
- 24
channels of +4, balanced and unbalanced, 24-bit
analog inputs
- Switchable
+6dB or +12dB boost per input in software for use
with -10 signals
- Stereo,
balanced 24-bit output
- Stereo
S/PDIF output
- Stereo
S/PDIF optical output
- Front
panel headphone output
- 16,
20, and 24-bit recording at 44.1 or 48 kHz
- Word
clock in and out
- Audiowire
connector for PCI-324 audio card
|
|
|
|
| 828mkII |
 |
The
828mkII contains everything you need to turn your
computer into a powerful 24-bit, 96kHz digital
audio workstation. The 828mkII provides 20 inputs
and 22 outputs, including 10 channels of pristine
96kHz analog recording and playback, combined with
8 channels of ADAT digital I/O and stereo S/PDIF.
Expand your system by connecting additional 828
or 896 FireWire audio interfaces.
The
828mkII is equally well-suited for studio and stage,
with or without a computer. As a computer interface,
the 828mkII provides 20 separate inputs and 22 outputs,
including separate main outs and headphone out. The
two mic/guitar/instrument inputs feature analog,
pre-amplified sends which allow you to insert your
favorite outboard EQ, compressor, guitar amp, reverb
or other effects processor before the signal goes
digital. Use any input as a return.
You
can add additional send/return loops using the 828mkII’s
new CueMix DSP™
on-board mixing feature, a flexible DSP-driven 20-input/8-bus
mixing and monitoring matrix that eliminates the need
for an external mixer or patchbay. Connect all of your
studio gear, including microphones, guitars, synths,
keyboards, drum machines and even effects processors.
Then monitor all of these live inputs via the 828mkII’s
main outs, headphone jack or any other output — with
virtually no monitoring latency and no processor drain
on your computer. You can even create separate monitor
mixes for the main outs, headphones and other outputs.
Control everything from the included CueMix Console™
software or directly from the 828mkII’s front-panel.
|
|
|
|
| HD192
home |
 |
The
MOTU HD192 high-definition 192-kHz audio interface
is designed for those who demand the very best audio
quality available.
Equipped
with the latest generation 24-bit, enhanced multi-bit
128x oversampling 192-kHz converters, the HD192
achieves a remarkable A-weighted signal-to-noise
ratio of 120 dB with balanced XLR connectors throughout.
Ideal for surround applications, the HD192's 12
inputs and 12 outputs can support two simultaneous
5.1 mixes. And the HD192 is full of advanced features,
like AES/EBU I/O with sample rate conversion both
in and out.
The
PCI-424 card introduced with the 2408mk3 is 192-kHz
ready. Just connect the HD192 expansion interface
to record 192-kHz audio.
The HD192 can be purchased as an expander for an existing
PCI-424-based MOTU Audio System, or as a core system
which includes the PCI-424 card and Audiodesk workstation
software. |
|
|
|
| 2408mk3 |
 |
This
box contains everything you need to turn your computer
into a powerful 24-bit/96kHz digital audio workstation.
The 2408mk3 provides 8 channels of pristine 96kHz
analog recording and playback, combined with 24 channels
of ADAT and Tascam digital I/O — the most ever
offered in a single rack space audio interface. Connect
up to four interfaces to the included PCI-424 card
for an expanded system capable of 96 simultaneous
active input and output connections at 96kHz.
The
2408mk3 is ideal for both the computer-based studio
with no mixing board and more elaborate studios
built around a digital mixer of any size. For the
computer-based studio, the included PCI-424 card
features CueMix DSP™, a flexible DSP-driven
mixing and monitoring matrix that eliminates the
need for an external mixer or patch-bay. Connect
all of your studio gear, including synths, keyboards,
and even effects processors. Then control it all
from your desktop with no audible monitoring latency
and no processor drain on your computer.
With
24 channels of digital I/O, the 2408 is ideal for
connecting your computer to a digital mixer. Both
ADAT lightpipe and Tascam TDIF digital connections
are supported at any sample rate up to 96kHz. And
here’s another 2408mk3 first: built-in video
and SMPTE synchronization. Slave your entire workstation
directly to video or SMPTE time code with sub-frame
accuracy—without a dedicated synchronizer.
The
2408mk3 provides cross-platform compatibility with
Macintosh, Windows 98SE/Me/2K/XP and all of your
favorite audio software and host-based effects via
WDM/ASIO/Sound Manager drivers. Or you can use the
included AudioDesk workstation software for Macintosh,
with 24-bit recording/editing and 32-bit mixing/processing/mastering.
The 2408mk3 upgrades the award-winning 2408 with
many significant improvements including 96kHz support,
SMPTE synchronization, support for four interfaces
and a 96-channel DSP-driven monitor mixer. |
|
|
|
| 24i/o |
 |
The
MOTU Audio 24I/O interface fulfills the promise of
host-based hard disk recording: to record, edit,
mix process, and master multitrack recording projects
entirely inside the computer. It provides 24 high
quality, 24-bit/96kHz analog inputs and outputs in
a cost effective, single rack space package, allowing
you to connect and record from 24 simultaneous analog
sources.
The
24I/O can be purchased as an expander for an existing
PCI-424-based MOTU Audio System, or as a core system
which includes the PCI-424 card and Audiodesk workstation
software |
|
|
|
|
|
