It may be small, but the UB502 features the same state-of-the-art Invisible Mic Preamp (IMP) and the same Ultra low-noise (ULN) design for highest possible headroom as its larger brethren. Its one mono channel plus 2 stereo channels with a 2-band EQ on the mono channel make it ideal for use with fixed audio installations as well as keyboards, samplers and computer application. Hobby musicians and video makers will also find use for this ultra-compact mixer.

Features

• 1 new state-of-the-art, studio-grade IMP "Invisible" Mic Preamp with:
• 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
• Ultra-wide 60 dB gain range
• Lowest possible distortion 0.0007% (20 Hz - 20 kHz)
• Effective, extremely musical 2-band EQ and peak LED on mono channel
• 5 balanced high-headroom line inputs
• State-of-the-art 4580 operational amplifiers provide lowest noise and distortion — better than 4560 op amps
• Main mix outputs plus separate headphones and stereo tape outputs
• Tape inputs assignable to main mix or phones outputs
• High-quality sealed rotary controls from ALPS for long-term reliability
  
  [ top ]

A shade larger than the UB502, the UB802 features 2 INVISIBLE MIC PREAMPs (IMPs), 6 balanced high-headroom line inputs, 1 post fader FX send per channel for external FX devices and 1 stereo aux return for FX applications or as separate stereo input. There is also an effective, extremely musical 3-band EQ on all channels. The UB802 is well-suited for use with fixed audio and video installations as well as keyboards, samplers and computer application.

Features

• 2 new state-of-the-art, studio-grade IMP "Invisible" Mic Preamp with: 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs Ultra-wide 60 dB gain range
• Lowest possible distortion 0.0007% (20 Hz - 20 kHz)
• Effective, extremely musical 3-band EQ on all channels
• 6 balanced high-headroom line inputs
• State-of-the-art 4580 operational amplifiers provide lowest noise and distortion — better than 4560 op amps
• 1 post fader FX send per channel for external FX devices
• 1 stereo aux return for FX applications or as separate stereo input
• Peak LEDs on all mono channels
• Main mix outputs plus separate control room, headphones and stereo tape outputs
• Tape inputs assignable to main mix or control room/phones outputs
• Switchable +48 V phantom power for condenser microphones
• High-quality sealed rotary controls from ALPS¬ for long-term reliability
• External power supply for noise-free audio and superior transient response
  
  [ top ]

This 10-input, 2-bus mic/line mixer features 2 state-of-the-art INVISIBLE MIC PREAMPs (IMPs) and an effective, extremely musical 3-band EQ plus switchable low-cut filter on all mono channels. There is 1 post fader FX send per channel for external FX devices, main mix outputs plus separate control room, headphones and stereo tape outputs. Tape inputs are assignable to main mix or control room/phones outputs. This is an extremely versatile mixer with possibilities ranging from connecting a DAT recorder and monitor speakers to running permanent video and audio installations.

Features

• Effective, extremely musical 3-band EQ plus switchable low-cut filter on all mono channels
• 10 balanced high-headroom line inputs with +4/-10 level selection on all stereo channels
• State-of-the-art 4580 operational amplifiers provide lowest noise and distortionÖbetter than 4560 op amps
• 1 post fader FX send per channel for external FX devices
• Peak LEDs on all mono channels
• Main mix outputs plus separate control room, headphones and stereo tape outputs
• Tape inputs assignable to main mix or control room/phones outputs
• FX to control room function helps to monitor effects signal via headphones & control room outputs
• Switchable +48 V phantom power for condenser microphones
• Long-wearing 60 mm logarithmic-taper ALPS¬ master fader and sealed rotary controls
• External power supply for noise-free audio and superior transient response
  
  [ top ]

They say, “Never change a winning horse”, but we just couldn’t resist. Already an absolute best-seller, our UB1002 10-input, 2-bus mic/line mixer now also features a stellar 24-bit/40 kHz multi-FX processor with 100 great-sounding presets including reverb, chorus, flanger, delay, pitch shifter and more. Also packed into this compact mixer are the same state-of-the-art Invisible Mic Preamps, ultra low-noise design circuitry and a 3-band EQ plus switchable low-cut filter on all mono channels—the features that have made the entire UB series so successful. The UB1002FX is a versatile mixer with possible applications ranging from connecting a DAT recorder and monitor speakers to running permanent video and audio installations.

Features

• Ultra low-noise ULN design, highest possible headroom, ultra-transparent audio
  2 new state-of-the-art, studio-grade IMP “Invisible” Mic Preamps with:
  - 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
  - Ultra-wide 60 dB gain range
  - Lowest possible distortion 0.0007% (20 Hz - 20 kHz)
  Integrated 24-bit digital stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
  Effective, ultra-musical 3-band EQ plus switchable low-cut filter on all mono channels
  State-of-the-art 4580 operational amplifiers provide lowest noise and distortion—better than 4560 op amps
  Clip LEDs on all mono channels
  10 balanced high-headroom line inputs with +4/-10 level selection on all stereo channels
  FX send control per channel for internal FX processor and/or as external send
  Main mix outputs plus separate control room, phones and stereo CD/tape outputs
  CD/tape inputs assignable to main mix or control room/phones outputs
  Switchable +48 V phantom power for condenser microphones
  Long-wearing 60-mm logarithmic-taper fader and sealed rotary controls
  External power supply for noise-free audio and superior transient response
  High-quality components and exceptionally rugged construction ensure long life
  Conceived and designed by BEHRINGER Germany

Our newest 12-input, 2-bus mic/line mixer boasts 4 state-of-the-art INVISIBLE MIC PREAMPs (IMPs) and an effective, extremely musical 3-band EQ plus switchable low-cut filter on all mono channels. There is also 1 post fader FX send per channel for external FX devices, main mix outputs plus separate control room, headphones and stereo tape outputs. Tape inputs are assignable to main mix or control room/phones outputs. Like the smaller UB1002, the UB1202 is an extremely versatile mixer with possibilities ranging from connecting a DAT recorder and monitor speakers to running permanent video and audio installations.

Features

• 4 new state-of-the-art, studio-grade IMP "Invisible" Mic Preamps with: 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
• Ultra-wide 60 dB gain range
• Lowest possible distortion 0.0007% (20 Hz - 20 kHz)
• Effective, extremely musical 3-band EQ plus switchable low-cut filter on all mono channels
• 12 balanced high-headroom line inputs with +4/-10 level selection on all stereo channels
• State-of-the-art 4580 operational amplifiers provide lowest noise and distortion — better than 4560 op amps
• 1 post fader FX send per channel for external FX devices
• Peak LEDs on all mono channels
• Main mix outputs plus separate control room, headphones, and stereo tape outputs
• Tape inputs assignable to main mix or control room/phones outputs
• FX to control room function helps to monitor effect signal via headphones and control room outputs
• Switchable +48 V phantom power for condenser microphones
• Long-wearing 60 mm logarithmic-taper ALPS¬ master fader and sealed rotary controls
• External power supply for noise-free audio and superior transient response
  
  [ top ]

They say, “Never change a winning horse”, but we just couldn’t resist. Already an absolute best-seller, our UB1202 12-input, 2-bus mic/line mixer now also features a stellar 24-bit/40 kHz multi-FX processor with 100 great-sounding presets including reverb, chorus, flanger, delay, pitch shifter and more. Also packed into this compact mixer are the same state-of-the-art Invisible Mic Preamps, ultra low-noise design circuitry and a 3-band EQ plus switchable low-cut filter on all mono channels—the features that have made the entire UB series so successful. The UB1202FX is a versatile mixer with possible applications ranging from connecting a DAT recorder and monitor speakers to running permanent video and audio installations.

Features

• Ultra low-noise ULN design, highest possible headroom, ultra-transparent audio
• 4 new state-of-the-art, studio-grade IMP “Invisible” Mic Preamps with:
  - 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
  - Ultra-wide 60 dB gain range
  - Lowest possible distortion 0.0007% (20 Hz - 20 kHz)
• Integrated 24-bit digital stereo FX processor with 100 awesome presets including reverb, chorus, flanger, delay, pitch shifter and various multi-effects
• Effective, ultra-musical 3-band EQ plus switchable low-cut filter on all mono channels
• State-of-the-art 4580 operational amplifiers provide lowest noise and distortion—better than 4560 op amps
• Clip LEDs on all mono channels
• 12 balanced high-headroom line inputs with +4/-10 level selection on all stereo channels
• FX send control per channel for internal FX processor and/or as external send
• Main mix outputs plus separate control room, phones and stereo CD/tape outputs
• CD/tape inputs assignable to main mix or control room/phones outputs
• Switchable +48 V phantom power for condenser microphones
• Long-wearing 60-mm logarithmic-taper Alps® fader and sealed rotary controls
• External power supply for noise-free audio and superior transient response
• High-quality components and exceptionally rugged construction ensure long life
• Conceived and designed by Behringer Germany

You get all the important elements right here in a 19” form-factor. This compact console offers 12 balanced high-headroom line inputs, 4 INVISIBLE MIC PREAMPs (IMPs), 2 aux sends per channel (1 pre/post fader switchable for monitoring/FX applications and 1 post fader for internal FX or as external send). You also get an effective, extremely musical 3-band EQ with semi-parametric mid band plus switchable low-cut filter on all mono channels. The integrated 24-bit digital stereo FX processor with 99 great-sounding VIRTUALIZER presets includes reverb, delay, chorus, compressor, tube distortion and others as well as a 1 kHz test tone generator. There are 2 subgroups with separate outputs for added routing flexibility and 2 multi-functional stereo aux returns with flexible routing.

Features

• Ultra low-noise ULN design, highest possible headroom, ultra-transparent audio
• 4 new state-of-the-art, studio-grade IMP ‹InvisibleŠ Mic Preamps with:
  - 130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
  - Ultra-wide 60 dB gain range
  - Lowest possible distortion 0.0007% (20 Hz - 20 kHz)
• Integrated 24-bit digital stereo FX processor with 99 great-sounding VIRTUALIZER presets including reverb, delay, chorus, compressor, tube distortion, vinylizer and more plus 1 kHz test tone generator
• Effective, extremely musical 3-band EQ with semi-parametric mid band plus switchable low-cut filter on all mono channels
• Inserts on each mono channel for flexible connection of outboard equipment
• 12 balanced high-headroom line inputs with +4/-10 level selection on stereo channels
• State-of-the-art 4580 operational amplifiers provide lowest noise and distortionÖbetter than 4560 op amps
• 2 aux sends per channel: 1 pre/post fader switchable for monitoring/FX applications, 1 post fader (for internal FX or as external send)
• Peak LEDs, mute, main mix and subgroup routing switches, solo and PFL functions on all channels
• 2 subgroups with separate outputs for added routing flexibility
• 2 multi-functional stereo aux returns with flexible routing
• Main mix outputs with jack and gold-plated XLR connectors, separate control room, headphones and stereo tape outputs
• Control room/phones outputs with multi-input source matrix
• Tape inputs assignable to main mix or control room/phones outputs
• Switchable +48 V phantom power for condenser microphones
• Long-wearing 60 mm logarithmic-taper ALPS¬ faders and sealed rotary controls
• Internal switch-mode power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus lowest possible power consumption for energy saving
• Extremely rugged steel construction ensures long life even under the most demanding conditions
• Rack mount brackets included

This is our second-largest console in the entire UB Series Mixing Consoles. There are 16 balanced high-headroom line inputs, 8 INVISIBLE MIC PREAMPs (IMPs), 3 aux sends per channel (1 pre fader for monitoring, 1 pre/post fader switchable for monitoring/FX applications and 1 post fader for internal FX or as external send). There are effective, extremely musical 3-band EQs with semi-parametric mid bands plus switchable low-cut filters on all mono channels. 2 subgroups with separate outputs for added routing flexibility and 3 multi-functional stereo aux returns with flexible routing are also there. You will also find the integrated 24-bit digital stereo FX processor with 99 great-sounding VIRTUALIZER presets.

Features

• Ultra low-noise ULN design, highest possible headroom, ultra-transparent audio
• 8 new state-of-the-art, studio-grade IMP "Invisible" Mic Preamps with:
  130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
  Ultra-wide 60 dB gain range
  Lowest possible distortion 0.0007% (20 Hz - 20 kHz)
• Integrated 24-bit digital stereo FX processor with 99 great-sounding Virtualizer presets including reverb, delay, chorus, compressor, tube distortion, vinylizer, and more — plus 1 kHz test tone generator
• Effective, extremely musical 3-band EQ with semi-parametric mid band plus switchable low-cut filter on all mono channels
• Inserts on each mono channel for flexible connection of outboard equipment
• 16 balanced high-headroom line inputs with +4/-10 level selection on stereo channels
• State-of-the-art 4580 operational amplifiers provide lowest noise and distortion — better than 4560 op amps
• 3 aux sends per channel: 1 pre fader for monitoring, 1 pre/post fader switchable for monitoring/FX applications, 1 post fader (for internal FX or as external send)
• Peak LEDs, mute, main mix and subgroup routing switches, solo and PFL functions on all channels
• 2 subgroups with separate outputs for added routing flexibility
• 3 multi-functional stereo aux returns with flexible routing
• Balanced main mix outputs with TRS and gold-plated XLR connectors, separate control room, headphones, and stereo tape outputs
• Control room/phones outputs with multi-input source matrix
• Tape inputs assignable to main mix or control room/phones outputs
• Switchable +48 V phantom power for condenser microphones
• Long-wearing 60 mm logarithmic-taper ALPS¬ faders and sealed rotary controls
• Internal switch-mode power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus lowest possible power consumption for energy saving
• Extremely rugged steel construction ensures long life even under the most demanding conditions
• Rack mount brackets included

If you are looking for a capable compact mixer with a breathtaking 3D XPQ stereo surround effect and a 9-band stereo graphic EQ, this is your machine. Of course, you also get 14 balanced high-headroom line inputs, 6 INVISIBLE MIC PREAMPs (IMPs), 3 aux sends per channel (1 pre fader for monitoring, 1 pre/post fader switchable for monitoring/FX applications and 1 post fader for internal FX or as external send). There are effective, extremely musical 3-band EQs with semi-parametric mid bands plus switchable low-cut filters on all mono channels. 2 subgroups with separate outputs for added routing flexibility and 2 multi-functional stereo aux returns with flexible routing are also there for your convenience. You will also find the integrated 24-bit digital stereo FX processor with 99 great-sounding VIRTUALIZER presets.

Features

• Ultra low-noise ULN design, highest possible headroom, ultra-transparent audio
• 6 new state-of-the-art, studio-grade IMP "Invisible" Mic Preamps with:
  130 dB dynamic range for 24-bit, 192 kHz sampling rate inputs
• Ultra-wide 60 dB gain range; Lowest possible distortion 0.0007% (20 Hz - 20 kHz)
• Integrated 24-bit digital stereo FX processor with 99 great-sounding Virtualizer presets including reverb, delay, chorus, compressor, tube distortion, vinylizer, and more — plus 1 kHz test tone generator
• Breathtaking 3D stereo surround effect for more vitality and enhanced stereo image
• 9-band stereo graphic EQ allows precise frequency correction of monitor or main mixes
• Effective, extremely musical 3-band EQ with semi-parametric mid band plus switchable low-cut filter on all mono channels
• Inserts on each mono channel for flexible connection of outboard equipment
• 14 balanced high-headroom line inputs with +4/-10 level selection on stereo channels
• State-of-the-art 4580 operational amplifiers provide lowest noise and distortion — better than 4560 op amps
• 3 aux sends per channel: 1 pre fader for monitoring, 1 pre/post fader switchable for monitoring/FX applications, 1 post fader (for internal FX or as external send)
• Peak LEDs, mute, main mix, and subgroup routing switches, solo and PFL functions on all channels
• 2 subgroups with separate outputs for added routing flexibility
• 2 multi-functional stereo aux returns with flexible routing
• Balanced main mix outputs with TRS and gold-plated XLR connectors, separate control room, headphones, and stereo tape outputs
• Control room/phones outputs with multi-input source matrix
• Tape inputs assignable to main mix or control room/phones outputs
• Long-wearing 60 mm logarithmic-taper ALPS¬ faders and sealed rotary controls
• Internal switch-mode power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response — plus lowest possible power consumption for energy saving
  

The PMH880S is our top-of-the-line box-type powered mixer. It features 10 channels (6 mono + 2 stereo) plus stereo tape returns—giving you the capacity to handle small bands or events with several microphones plus various playback devices. Its 2 x 400-Watt COOLAUDIO amplifier delivers massive power and flexibility for a wide variety of house and monitor speaker configurations. With our revolutionary COOLAUDIO amplifier technology you get enormous power, incredible sonic performance and super-light weight delivered in an ultra-compact mixer that is nearly half the depth and weight of conventional powered mixers. Along with 8 high-quality balanced low-impedance mic preamps, there are balanced high-impedance line inputs for direct connection of line sources or high-output instruments. Each PMH880S channel features a monitor send and two FX sends. Mono channels also include a switchable -30 dB pad.

Designed for a multitude of applications, the PMX3000 is Behringer's mid-sized console-style powered mixer that arms you for anything from standard ensembles to full-blown multimedia events. It features 16 channels (8 mono + 4 stereo), plus stereo tape returns, two monitor paths and extremely flexible I/O options. The 2 x 400-Watt (800 Watts bridged mode) CoolAudio amplifier will easily handle a large audience.

With our revolutionary CoolAudio amplifier technology you get enormous power, incredible sonic performance and super-light weight delivered in an ultra-compact mixer that is nearly half the weight of conventional powered mixers.

Adding to the list of 'big-mixer' features are: Behringer's awesome XPQ 3D surround sound effect, an integrated Voice Canceller which removes vocals for karaoke applications, a stereo 7-band graphic EQ with FBQ Feedback Detection, dual 12-segment LED output level meters and faders for precise level control of mono, main 1 and monitor 1 & 2 buses. The integrated mono output can be used to feed an external subwoofer. Stereo power amp inserts and Phones/Ctrl R output with dedicated level control for headphones or powered monitors are also on board.

The PMH3000 features 8 balanced low-impedance mic inputs with state-of-the-art IMP 'Invisible' Mic Preamps, low-cut filter and additional channel inserts plus balanced high-impedance line inputs for direct connection of line sources or high-output instruments. Its full-featured channel strips include input level trim controls, signal and clip LED indicators, dual monitor sends, FX sends, mute and PFL functions plus high-quality 60-mm logarithmic faders for exact level control. Mono channels also include low-cut filters, inserts for connecting external processors and A/B switching for selecting the 1/4 in. TRS or RCA input connectors on channels 9 – 12. The dedicated CD/Tape input allows you to connect a line-level stereo source so you can play music during your breaks without having to change the fader positions and lose your mix. The super-rugged carrying handle makes it easy to transport while professional Speakon (r) connectors ensure outstanding performance and reliable connection.

Features

• Max. Output Power:
  2 x 400 W @ 4 ohms
  1 x 800 W @ 8 ohms
• Speaker Outputs: Neutrik Speakon comparable
• Mono Mic/Line Channels: 8 (XLR + 1/4 in. TRS)
• Stereo Line Channels: 4 (1/4 in. TRS + extra XLR mic inputs on ch. 9/10,11/12)
• Channel Inserts: On mono channels
• Channel EQ: 3-band
• Graphic EQ/FBQ Feedback Detection: 7-band EQ + FBQ
• Phantom Power (+48 V): Yes
• Aux Sends: 2 pre/1 post fader
• 24-Bit Digital FX Processor: 1
• XPQ Surround Effect: Yes
• Voice Canceler: Yes
• Standby Switch: No
• Speaker Processing: No
• Power Amp Modes: Main L + Main R, Monitor + Main, Main bridge mode
• Power Amp Inserts: 2
• Main Mix Line Outputs: 2 x 1/4 in. TRS L/R
• Mono Line Output: Yes
• Monitor Line Outputs: 2 x 1/4 in. TRS
• 2-Track I/O (RCA conn.): Yes
• Phones/Ctrl.Room Output: Yes
• Dimensions H x W x D (approx.): 4 7/8 in. x 18 3/4 in. x 18 1/8 in. (122 x 476 x 460 mm)
• Weight (approx.): 10.8 kg (23.8 lbs.)
• Special Features:
  PFL option for all input channels
  AFL option for main mix, mono out, FX and monitor sends